+1 702 476 3565

Home / Technical Document Request Center
Technical Document Support

LED Display Datasheet, Catalog & Technical Document Request Center

Access Uniview LED display technical documents, including product catalogs, technical datasheets, installation guides, certifications and project reference files. Request the latest approved document set for your exact product series, pixel pitch and project configuration so distributors, AV integrators and project buyers can quote, review and prepare installation with confidence.

Need a fast document check? Email sales@univiewled.com or call +1 702 476 3565.
Quick Answer

Uniview LED provides LED display catalogs, datasheets, installation references and available certification files by request. Because LED display specifications can vary by product series, pixel pitch, cabinet version, power design, control system, certification requirement and production revision, buyers should request the latest approved document set before quotation, engineering review or procurement.

Last reviewed: August 7, 2026 Technical review: Uniview LED Product & Applications Team Scope: Catalogs, datasheets, installation references and certification requests
Document Matching

How Uniview LED matches technical documents

This page helps buyers request the correct document set for real projects instead of relying on outdated or mismatched files. The goal is to support product selection, quotation, engineering review and installation preparation.

1. Submit project details

Choose the product series and send the application, screen size, installation country, target pixel pitch and required document type.

2. Uniview LED reviews the request

Our sales or applications team checks the product series, project stage and required document type before matching the most suitable file set.

3. Current files are sent by email

The approved files are sent after review so buyers can quote, compare, submit and prepare installation with more accurate technical information.

4. Project-specific files are reviewed carefully

Quotation files, certification references, engineering drawings and project-specific documents are checked before release to make sure the information matches the approved product configuration and buyer requirement.

Document Types

What Uniview LED can provide by request

General product information is available on the website. Current catalogs, datasheets, installation references and certification documents are provided by request so the file set matches the approved product configuration and project requirement.

Catalog

Best for product comparison, application matching, cabinet family review and early project discussion.

Datasheet

Best for pixel pitch, brightness, refresh rate, cabinet size, power, weight and control-system review.

Installation File

Best for structure planning, access clearance, cabinet layout, power distribution and maintenance preparation.

Certification File

Best for distributor records, project submittals, compliance review and procurement documentation.

Product Series

Request documents by LED display series

Select the closest product series below. If the final model, pixel pitch or cabinet version is not confirmed, send your application, screen size and viewing distance first. Uniview LED will help match the right product series and document set.

i
Document matching note: LED display documents can change by product series, pixel pitch, cabinet version, power design, receiving card, control system and production revision. Requesting the current approved file helps avoid quotation, procurement or installation errors.
Rental LED Display

TST Series

For touring events, concert stages, rental LED walls and temporary indoor or outdoor event production.

Request documents
Transparent Rental LED

TSL Series

For stage transparency effects, creative rental backdrops, retail events and lightweight visual installations.

Request documents
Rental / Fixed LED

UR PRO Series

For high-refresh rental applications, exhibition halls, broadcast-friendly stages and flexible project deployment.

Request documents
Indoor Fixed LED

GX PRO Series

For retail, airports, corporate lobbies, education, hospitality and fixed indoor LED wall installations.

Request documents
Outdoor Fixed LED

Falcon Series

For outdoor advertising, DOOH billboards, building façades and long-term fixed LED display projects.

Request documents
Fine Pitch LED

GHC Series

For control rooms, conference rooms, broadcast walls and fine-pitch indoor LED visualization projects.

Request documents
UHD Fine Pitch LED

UHD Series

For 16:9 LED video walls, corporate display rooms, command centers and high-resolution indoor applications.

Request documents
Interactive Floor LED

I Series

For interactive LED floors, exhibitions, showrooms, retail activations and load-bearing floor display projects.

Request documents
Indoor Rental LED

UM Series

For indoor event rental, exhibition booths, corporate stages and high-refresh temporary LED wall setups.

Request documents
Stage LED Display

AS Series

For stage LED walls, curved configurations, camera-friendly events and live production environments.

Request documents
Fine Pitch Rental LED

MT Series

For fine-pitch rental, corporate events, premium stages and close-viewing indoor LED display applications.

Request documents
Sports LED Display

GM Series

For stadiums, sports venues, perimeter LED systems and event display projects requiring impact-aware design.

Request documents
All-in-One LED

AM Series

For meeting rooms, classrooms, boardrooms and integrated LED display systems with simplified deployment.

Request documents
Other Product Series

Not Listed?

If your required model is not listed, send the application and screen size. Uniview LED will match the correct document set.

Ask our team
Before You Request

Send project details so the document matches the real configuration

A datasheet is only useful when it matches the screen size, pixel pitch, cabinet type, installation environment and control method. Providing these details helps our team send the right file faster.

  • Application type
  • Indoor or outdoor use
  • Screen width and height
  • Preferred pixel pitch
  • Closest viewing distance
  • Installation city or country
  • Fixed, rental or floor use
  • Required certification files
  • Target delivery schedule
  • Distributor or end-user role
Request Matched Technical Files
FAQ

LED display datasheet and procurement FAQ

These FAQs and the quick reference table help distributors, AV integrators, project buyers and engineering teams confirm the files they need before quotation, compliance review and installation planning.

Quick Reference

Match the buyer question to the right technical file

This table gives B2B buyers a fast summary of the key data to confirm before requesting LED display catalogs, datasheets, installation drawings or certification files.

Buyer question Key data to confirm Document to request
10m × 5m LED video wall 50 sqm area, pixel pitch, cabinet size, average power, maximum power, service method Model datasheet + power data + cabinet layout
100 sqm rental stage screen 500 × 500mm or 500 × 1000mm cabinet, 3840Hz/7680Hz refresh rate, rigging method, packing Rental datasheet + hanging/stacking reference + spare parts list
Outdoor billboard 5,000–8,000 nits brightness, IP65/IP66 requirement, sun exposure, automatic dimming Outdoor datasheet + IP information + available certification files
Indoor wall at 3m viewing distance P1.5–P2.5 comparison, screen size, content type, target resolution Pixel pitch recommendation + fine pitch or indoor fixed datasheet
Control room under 2mm pixel pitch P0.9/P1.2/P1.5/P1.8, 24/7 operation, front service, heat dissipation, redundancy Fine pitch datasheet + cabinet drawing + power plan + control topology
Final document requirements should be confirmed according to the project country, installation environment, local authority review and approved product configuration.
What LED display datasheet do I need before buying a 10m × 5m LED video wall?

Core answer: For a 10m × 5m LED video wall, request a 50 sqm project-matched datasheet showing pixel pitch, brightness, refresh rate, cabinet size, cabinet weight, average power, maximum power, service method, control system and certification information before quotation or purchase.

Problem: A generic datasheet may not match the real cabinet version, receiving card, power design or certification requirement.

Quantified evidence: A 10m × 5m screen equals 50 sqm. If maximum power is 600W/sqm, estimated maximum load is 30kW; if average power is 200W/sqm, average operating load is 10kW.

Buyer checklist:

  • Confirm indoor or outdoor use, screen width and height, and closest viewing distance.
  • Request average power, maximum power, cabinet size, cabinet weight and service method.
  • Confirm control system, certification requirement and installation country before quotation.
What is the difference between an LED display catalog, datasheet, installation drawing and certification file?

Core answer: A catalog supports product comparison, a datasheet supports technical selection, an installation drawing supports engineering preparation, and a certification file supports compliance review for tenders, procurement records and public venue projects.

Problem: B2B buyers often ask for one PDF, but LED display purchasing normally needs different documents at different project stages.

Quantified evidence: A complete pre-order document set usually includes 4 file types: catalog, datasheet, installation reference and available certification file.

Buyer checklist:

  • Use the catalog to compare product series and applications.
  • Use the datasheet to check pixel pitch, brightness, refresh rate, cabinet size, power and weight.
  • Use drawings and certificates for engineering review, tender submission and procurement records.
What information is needed to request the correct LED display datasheet?

Core answer: To request the correct LED display datasheet, provide at least 8 details: application, environment, screen size, viewing distance, pixel pitch, installation country, required certificates and project stage.

Problem: Without project details, the supplier may send a file for the wrong cabinet, brightness level, IP rating, receiving card or power configuration.

Quantified evidence: For a 3m indoor boardroom, a P1.5–P2.5 datasheet may be reviewed; for a 100 sqm rental stage screen, cabinet handling, refresh rate and rigging documents become more important.

Buyer checklist:

  • Send application type: stage, billboard, retail, control room, stadium, floor or boardroom.
  • Send width × height, viewing distance, preferred pixel pitch and installation country.
  • State whether you need catalog, datasheet, drawing, certification file or quotation support.
What documents are needed before ordering a 100 sqm rental LED stage screen?

Core answer: Before ordering a 100 sqm rental LED stage screen, request the catalog, datasheet, cabinet drawing, hanging/stacking reference, power data, control notes, spare parts recommendation and packing information.

Problem: Rental screens are repeatedly installed, transported and filmed, so the buyer must confirm both technical performance and mechanical handling details.

Quantified evidence: 100 sqm rental projects often compare 500 × 500mm and 500 × 1000mm cabinets; camera-facing stages usually request 3840Hz or higher, while broadcast, XR or close camera work may prefer 7680Hz.

Buyer checklist:

  • Confirm indoor/outdoor rental use, cabinet size and rigging method.
  • Check refresh rate, grayscale, power data, flight case quantity and spare parts.
  • Ask whether the screen will be used for live camera, broadcast, XR stage or touring events.
What certification documents are required for LED display projects in the USA: ETL, FCC or UL?

Core answer: For USA LED display projects, buyers commonly review safety certification documents such as ETL or UL-related files, FCC electromagnetic compliance information and any local AHJ requirements before approval.

Problem: A certificate for one product series, voltage or cabinet version may not automatically cover another configuration.

Quantified evidence: U.S. projects usually check 3 compliance areas: product safety, electromagnetic/radio-frequency compliance and local installation approval for venues such as malls, stadiums and municipal sites.

Buyer checklist:

  • Confirm exact product series, voltage, power system and cabinet version.
  • Ask which ETL, UL-related or FCC documents are available for that configuration.
  • Confirm local AHJ, tender or end-client requirements before submitting documents.
  • Treat certificate availability and acceptance as project-specific, not as a universal guarantee for every cabinet version.
What installation drawing is required for a wall-mounted indoor LED video wall?

Core answer: A wall-mounted indoor LED video wall should include front elevation, side-view depth, cabinet layout, mounting structure reference, cable routing, power input position and service-access clearance.

Problem: A visual rendering is not enough for engineering; the installer needs cabinet layout, wall load, depth and maintenance access details before production or installation.

Quantified evidence: A 10m × 5m wall equals 50 sqm and may contain dozens or hundreds of cabinets depending on cabinet size and pixel pitch, so drawings must confirm layout before manufacturing.

Buyer checklist:

  • Request front view, side view, cabinet layout and mounting reference.
  • Confirm front service or rear service, cable route, ventilation and wall flatness.
  • Check wall load-bearing capacity and maintenance space before order confirmation.
  • Confirm final drawings with the structural or installation engineer before production and site work.
How much power does a 10m × 5m LED display consume at average and maximum load?

Core answer: A 10m × 5m LED display is 50 sqm. If maximum power is 600W/sqm, estimated maximum load is 30kW; if average power is 200W/sqm, average operating load is 10kW.

Problem: Many buyers only ask for screen price, but power consumption affects electrical design, cooling, cable sizing, installation cost and local approval.

Quantified evidence: Power formula: screen area × W/sqm. Example: 50 sqm × 600W/sqm = 30,000W maximum; 50 sqm × 200W/sqm = 10,000W average.

Buyer checklist:

  • Request both average and maximum power, not only one value.
  • Confirm voltage, circuit quantity, power distribution box and safety margin.
  • Review cooling, ventilation and local electrical requirements before installation.
  • Use early power figures for planning only; final circuit design should follow approved project data and local electrical code.
What pixel pitch is best for a 3m viewing distance indoor LED wall?

Core answer: For a 3m viewing distance indoor LED wall, P1.5 to P2.5 is usually the practical selection range for boardrooms, retail displays, corporate lobbies and close-viewing presentation walls.

Problem: Choosing pixel pitch only by price can lead to visible pixels, insufficient resolution or unnecessary cost.

Quantified evidence: At 3m viewing distance, P1.5–P1.8 is better for fine text, dashboards and premium meeting rooms; P2.0–P2.5 is often more cost-effective for general video and presentation content.

Buyer checklist:

  • Confirm viewing distance, screen size and content type.
  • Compare total screen resolution, not only pixel pitch.
  • Request a pitch recommendation before locking quotation or cabinet quantity.
What brightness is required for an outdoor LED billboard: 5,000 nits, 6,500 nits or 8,000 nits?

Core answer: For outdoor LED billboards, 5,000–6,500 nits fits many roadside and commercial screens, while 7,000–8,000 nits may be preferred for direct sunlight or high ambient light locations.

Problem: Brightness that is too low may wash out in sunlight; brightness that is too high may waste energy or conflict with nighttime brightness limits.

Quantified evidence: A shaded north-facing outdoor display may not need the same brightness as a west-facing roadside billboard exposed to afternoon sun.

Buyer checklist:

  • Confirm screen direction, sun exposure and operating hours.
  • Request automatic brightness adjustment for day/night operation.
  • Check local signage, DOOH or nighttime brightness rules before final selection.
  • Confirm final brightness settings with the project location, operating schedule and local outdoor media requirements.
What IP rating is needed for an outdoor LED display in rain: IP65 or IP66?

Core answer: For outdoor LED displays exposed to rain, IP65 is commonly requested as a baseline, while IP66 may be considered for stronger water spray, harsher weather or more demanding outdoor exposure.

Problem: Outdoor waterproof performance depends on front and rear protection, cable entry, sealing, drainage and service method, not only one IP number.

Quantified evidence: IP ratings use two digits: the first relates to solid particle protection and the second relates to liquid ingress protection. Front and rear ratings may differ on LED cabinets.

Buyer checklist:

  • Confirm front IP rating and rear IP rating separately.
  • Check whether the display is fully outdoor, covered outdoor or semi-outdoor.
  • Review drainage, cable entry, module sealing and maintenance method before installation.
  • Confirm the final IP requirement according to rain exposure, cabinet orientation, drainage and maintenance access.
What refresh rate is needed for a camera-friendly LED wall: 3840Hz or 7680Hz?

Core answer: For camera-friendly LED walls, 3840Hz is a common professional baseline; 7680Hz may be preferred for broadcast, premium stage production, slow-motion shooting, close camera shots or XR environments.

Problem: Refresh rate helps reduce scan lines and flicker, but camera performance also depends on grayscale, driver IC, scan mode, brightness and camera shutter settings.

Quantified evidence: A standard event LED wall may use 3840Hz or higher, while broadcast, XR stage and close camera projects often evaluate 7680Hz with the full control system.

Buyer checklist:

  • Confirm camera frame rate, shutter speed and shooting distance.
  • Review grayscale, scan mode, driver IC and low-brightness performance.
  • Ask for a camera test or project reference for broadcast-critical applications.
What files should an AV integrator request before designing a control room LED wall under 2mm pixel pitch?

Core answer: For a control room LED wall under 2mm pixel pitch, request the fine-pitch datasheet, cabinet drawing, power plan, control topology, front-service notes, heat dissipation data, spare parts list and certification files.

Problem: Control rooms require close viewing, 24/7 operation, stable image quality and serviceability, so a generic product catalog is not enough for AV system design.

Quantified evidence: For P0.9, P1.2, P1.5 or P1.8 projects, resolution planning, redundancy, cabinet depth, front service and heat control should be confirmed before quotation and engineering design.

Buyer checklist:

  • Confirm pixel pitch, screen size, target resolution and operating hours.
  • Request cabinet drawing, power plan, control topology and front-service method.
  • Review redundancy, spare parts, calibration support and certification requirements early.
  • Confirm final submittal files with the AV consultant, end client and local project approval process.
Next Questions

Questions buyers usually ask next

  1. Which Uniview LED product series fits my project: rental, outdoor fixed, fine pitch, floor, sports or all-in-one LED?
  2. Can Uniview LED recommend the right pixel pitch and document set if I only know the screen size and viewing distance?
  3. What technical files should I prepare before asking for a formal LED display quotation?

Tell us what you are building

Send the application, screen dimensions, viewing distance, installation city and target schedule. If you are not sure which product series or pixel pitch is suitable, Uniview LED will help match the right product and document set for review.