Falcon is an outdoor fixed LED display for North American DOOH, retail facades, shopping centers and architecture-integrated media. Four configurations cover 1.953–3.906 mm pixel pitches, 3,000–4,500 cd/m² brightness, 7,680 Hz refresh rate, 15-bit grayscale and IP65 front / IP54 rear protection. Front and rear service options help simplify long-term maintenance for permanent outdoor installations.
Uniview LED supports project planning for outdoor fixed LED displays, including model selection, cabinet layout, service access, power planning and quotation review.

Falcon uses a deformation-proof module design to improve cabinet reliability in demanding outdoor environments. The data sheet states no visible deformation even at -30℃ or 80℃, helping outdoor DOOH screens keep better flatness under heat, cold, and long-term fixed installation conditions.
The V202606 standard specification lists 3000 cd/m² brightness for FA1.95 COT and FA2.6 COT, and 4500 cd/m² for FA2.97 and FA3.91. All four models list 7680 Hz refresh rate, 15-bit grayscale and 140° / 140° viewing angle.
The standard configurations use 94.7 mm-deep cabinets with IP65 front and IP54 rear protection. The uploaded sheets list front and rear maintenance, with 500×500 mm cabinets for FA1.95 COT, FA2.6 COT and FA2.97, and a 500×1000 mm cabinet for FA3.91.
The uploaded V202606 standard configuration lists fixed and hanging installation for all four models. Final structure, service access and any project-specific corner or curved solution should be confirmed through the approved engineering drawing.
V.202606 Standard Configuration
The comparison below follows the uploaded FA V202606 standard specification. Swipe or drag left and right on smaller screens.
Values follow the uploaded FA V202606 standard configuration. Final specifications remain subject to the approved project configuration and released datasheet.
Answer-first summary: For North American DOOH, a Falcon outdoor LED project should be selected by screen size, viewing distance, brightness, IP rating, maintenance space, and power. Falcon supports 1.953 mm, 2.604 mm, 2.976 mm and 3.906 mm options, 7680 Hz refresh, IP65 front / IP54 rear, 94.7 mm cabinet depth, and 610 / 205 W/m² maximum/average power data. Confirm viewing distance, structure, permits, power, and service access before ordering.
The uploaded standard specification lists four models: FA1.95 COT, FA2.6 COT, FA2.97 and FA3.91. Their pixel pitches are 1.953, 2.604, 2.976 and 3.906 mm.
FA1.95 COT and FA2.6 COT are listed at 3000 cd/m². FA2.97 and FA3.91 are listed at 4500 cd/m². All four models support 0–100% brightness adjustment.
All four V202606 configurations list 7680 Hz refresh rate, 15-bit grayscale and 140° / 140° horizontal and vertical viewing angle.
The uploaded sheets list 610 W/m² maximum and 205 W/m² average power for all four models. Electrical capacity should be calculated from the approved screen area and the final project power-distribution design.
FA1.95 COT, FA2.6 COT and FA2.97 use a 500×500×94.7 mm cabinet weighing 10 kg. FA3.91 uses a 500×1000×94.7 mm cabinet weighing 15 kg.
The V202606 standard specification lists IP65 front and IP54 rear protection, front and rear maintenance, and fixed or hanging installation.
Send the screen width and height, closest viewing distance, required brightness, installation method, service-access direction, destination, project schedule and preferred Falcon model. Uniview LED can then review cabinet quantity, power load, control system, spare parts and quotation scope.
Send the screen size, closest viewing distance, installation location, mounting method, service-access direction, power requirements, project schedule and U.S. or Canadian destination. Uniview LED can review the Falcon model, cabinet layout, power load, spare-parts plan and quotation scope.
Tell us the project basics. We will use them to recommend a more relevant LED display configuration and quotation scope.
Thank you for your inquiry. Uniview LED sales manager will contact you shortly.