+1 702 476 3565

Outdoor Stage LED Case Study · Sichuan, China

200 m² Outdoor LED Stage at Sichuan Liangshan Torch Plaza

A 200 m² Uniview LED AQ6.9 outdoor display was installed at Sichuan Liangshan Torch Plaza for the 2024 celebrations. The large-format screen serves as the primary stage backdrop, supporting festival visuals, live performance content and wide-audience viewing in an outdoor venue.

Outdoor festival-scale visual canvas The 200 m² LED display forms the main digital backdrop for the plaza stage and large audience area.
Project Model AQ6.9
Display Area 200 m²
Location Sichuan, China
Project Year 2024
Quick Answer

An outdoor stage LED screen needs more than large area and high brightness. The complete system should be planned around viewing distance, daylight conditions, weather exposure, stage lighting, structural support, power distribution, signal routing, camera workflow and service access.

At 200 m², the display is large enough to become part of the stage architecture rather than a secondary AV element.

The AQ6.9 installation provides a broad digital canvas for performance graphics, event themes, live video and scenic content. In a public-plaza environment, the display also has to support long audience sightlines and maintain consistent image presentation across a large physical surface.

Outdoor event performance depends on the complete system: LED modules and cabinets, control hardware, power distribution, structural support, weather protection, content design and on-site commissioning all contribute to the final result.

01 / SCALE 200 m² active display area

The wide LED canvas supports large scenic visuals and readable event content for a broad audience area.

02 / OUTDOOR Built around outdoor operating conditions

Bright ambient light, moisture, temperature changes and exposed cabling must be considered in system planning.

03 / STAGE Integrated with live performance

LED content, stage lighting, cameras and show control need coordinated brightness, timing and playback.

02 · Outdoor Stage Priorities

What Matters Beyond Screen Size

Outdoor event screens are exposed to a more demanding environment than indoor stage walls. Pixel pitch is only one selection variable; daylight readability, weatherproofing, structural engineering, thermal behavior, power, camera use and maintenance strategy all matter.

01 / VISIBILITY

Match brightness to the real ambient-light condition

Outdoor brightness should be specified for the venue, screen orientation, operating hours and direct-sun exposure. Excess brightness can waste power and reduce comfortable viewing, while insufficient output can reduce daytime visibility.

02 / WEATHER

Plan cabinet protection, drainage and cable exposure

Outdoor reliability depends on enclosure design, connector protection, installation orientation, water management and the real environmental conditions at the venue.

03 / CAMERA

Validate the screen with the production camera workflow

Refresh rate should be considered together with scan ratio, operating brightness, grayscale, camera shutter and frame rate. The headline refresh number alone does not define camera performance.

Sichuan Liangshan Torch Plaza outdoor LED stage display overview
03 · System Planning

Engineer the Outdoor Stage as a Complete System

For a 200 m² stage screen, cabinet quantity is only the starting point. Structural load, wind conditions, receiving-card loading, processor capacity, power segmentation, cable routes and maintenance access all need to be resolved before commissioning.

01
Confirm stage geometry

Lock the buildable active width and height from the approved cabinet matrix and structural design.

02
Calculate the native pixel canvas

Match the real LED resolution with media-server output, processors and the event content workflow.

03
Segment power and signal

Divide a large screen into practical electrical and data zones for safer installation and easier troubleshooting.

04
Commission under show conditions

Test brightness, calibration, camera behavior and content playback with the actual stage lighting and production equipment.

04 · Historic Project Data

Liangshan Torch Plaza Project at a Glance

These values come from the supplied project source. It identifies AQ6.9 as the project model, with a total screen area of 200 m² in Sichuan and installation year 2024. The source does not provide a complete released optical, cabinet or electrical specification table, so brightness, refresh rate, IP rating, cabinet dimensions and power values are not inferred here.

Project
Sichuan Liangshan Torch Plaza
LED model
AQ6.9
Total screen area
200 m²
Application
Outdoor stage / festival plaza
Location
Sichuan, China
Installation year
2024
06 · Buyer Checklist

Planning an Outdoor Stage LED Screen

For festivals, public plazas, concerts and outdoor celebrations, provide the project conditions that affect pixel pitch, brightness, weather protection, structure, power and camera performance before requesting a final configuration.

Active screen dimensions

Provide target width and height, stage opening and any curved, stepped or segmented screen geometry.

Viewing distance

Define the closest audience position, typical viewing zone and farthest important sightline.

Daylight conditions

Confirm screen orientation, operating hours and whether direct sunlight reaches the display surface.

Structural + wind conditions

Confirm hanging or stacking method and have final structure and wind loading reviewed by a qualified engineer.

Camera workflow

Share broadcast, live-stream, frame-rate, shutter and slow-motion requirements before locking the display configuration.

Power + service planning

Provide voltage, distribution limits, cable routes, maintenance access and any required signal or power redundancy.

Plan Your Outdoor Stage

Planning an Outdoor Concert, Festival or Plaza LED Screen?

Send the target display dimensions, viewing distance, stage structure, daylight conditions, camera workflow, installation method, destination, power standard and project schedule. Uniview LED can help review pixel pitch, cabinet quantity, power distribution, signal architecture and project configuration.

Contact Uniview LED USA →